Filter By:
- Parts & Accessories (37)
- Pedals (124)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pedals
$113.00
- A flat platform, which is perfect for almost any casual ride and gives you the freedom to ride and walk in the comfort of your favorite shoes.
- On the other side, the ATAC clipless system lets you clip-in with your favorite cycling shoe, giving you extra pedaling efficiency when you find yourself on longer or faster trips.
- Pedal Material: Composite
- Pedal Weight: 174g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$106.00
- Versatile and incredibly affordable.
- The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time.
- The ATAC EASY cleat makes for simple setup and clipping in and out even easier.
- Pedal Material: Composite
- Pedal Weight: 197g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$120.00
- Large platform and an easy-entry system, make it perfect for everyday use.
- Cleat engagement is easy and positive in every condition and for every skill level.
- Hollow steel axle makes the pedal lightweight yet durable, while the open design keeps you riding with ease, clearing mud and debris every time you clip in.
- Pedal Material: Composite
- Pedal Weight: 192g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$136.00
- Oversized, hollow, steel axle, is lightweight yet rugged enough for any trail condition.
- TIME's clamping system makes clipping in super easy.
- Two release angle options (13° or 17°) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions.
- Pedal Material: Composite
- Pedal Weight: 190g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$83.00
- At under 200 grams per pedal, the XC 2 is very versatile and incredibly affordable.
- The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time.
- The ATAC EASY cleat makes for simple setup and clipping in and out even easier.
Specs:
- Pedal Material: Composite
- Pedal Weight: 151g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$113.00
- Hollow steel axle that makes it light and durable, as well as TIME's exclusive ATAC system that offers very easy engagement.
- The open design automatically clears debris each time you step in for reliable performance every time.
Specs:
- Pedal Material: Composite
- Pedal Weight: 147g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$143.00
- Hollow steel axle for lightness and durability, a composite body, and tension adjustment to customize the feel of the pedal underfoot.
- The exclusive ATAC clamping system offers very easy engagement, and the open design automatically clears debris each time you step in.
Specs:
- Pedal Material: Carbon
- Pedal Weight: 145g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$33.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$33.00
- Works with all RXS and Impact pedals.
- Five degrees of heel float and 2.5mm of lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$226.00
- Aluminum body that is slightly more compact than the SPECIALE 12, yet it offers a stable platform and four adjustable pins for optimal grip.
- The micro-adjustable tension clamping system allows riders to fine-tune the pedal function for their preferred riding style.
- TIME's patented clamping system allows for easy entry and positive, predictable release, as well as a self-cleaning design to ensure reliable performance in all conditions.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 196g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$98.00
- All of the technologies from the rest of XPRESSO line at an affordable price.
- The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost.
- If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$128.00
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle.
- A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal.
- The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$189.00
- The only pedal in the XPRESSO line to use a carbon body.
- Hollow steel axle is light and durable at the same time.
- ICLIC system is a pre-opened design, making clipping in super easy.
- Carbon blade tension adjustment, a low stack height, and an oversized platform for pedaling efficiency and comfort.
Specs:
- Pedal Material: Carbon
- Pedal Weight: 99g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$49.00
- Pedal Body Cover Cap Left/Right TIME Xpresso Black including screws
$189.99
Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'd aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control.
- Body: CNC-machined 6061 Aluminum
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight, self-lubricating sealed bushings
- Replaceable pins
- Size: 117mm x 110mm
- Weight: 208g (each)
$189.99
Time to take your eBike to the next level. With a pin layout derived from our downhill pedals for maximum grip, the ePedal is specifically designed for eBikes with its narrow profile for optimum cornering clearance. Compact cartridge bushings paired with a sealed bearing system keep things running smoothly for miles and miles. Topping it off is an electric design with full-coverage laser etching on a premium finish.
- Body: CNC-machined 6061 Aluminum
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight compact bushings + sealed bearings
- Replaceable pins
- Size: 102mm x 108mm
- Weight: 170g (each)
$149.99
The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021.
- Super slim 12mm for maximized pedal clearance
- CNC weight-optimized trail pedal at 360g per set
- Forged alloy body is shot-peened and anodized for increased durability
- Equipped with hollow taper Chromoly steel axles for unmatched strength
- Sealed bearings and IGUS bushings
- 18 preassembled pins in virtual concavity for ultimate grip
- Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike
- Crank boots compatible axle
$54.99
Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals
- 1 set L&R axle
- 2pcs IGUS bushing
- 2pcs O-ring
- 2pcs dust cap
- 2pcs stainless shim washer
- 2pcs silicone friction seal
- 2pcs lock nut
$11.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer
$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip
$89.99
- Large platform 100mmx105mm size with concave profile combines support with ultimate grip
- Strong and lightweight one piece alloy body
- Forged chromoly axle delivers strength and durability
- Shot-peen surface increases fatigue life and impact resistance
$137.49
- Crank Boot Compatible Axles
- Full Anodized Finish
- 12mm Thin—Massive 11x11cm Platform
- Cold Forged Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Chamfered Side Edges for Improved Cornering Clearance
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- 18 Adjustable Pins per Pedal
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$49.99
- Crank boots compatible axle rebuild kits for SPIKE and OOZY pedals (with bright green friction seals), produced in 2015 or later. Bearings must be purchased separately.
- Crank boots compatible axle
- Sealed Bearing x2pcs
- 10mm IGUS Bushing x2pcs
- Green Friction Seal x2pcs
- Locknut
- O-ring x 2pcs
$11.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included
$112.49
- Full Anodized finish
- 16-12mm concave platform
- 100mm x 105mm platform
- CNC Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$112.49
- Full Anodized finish
- 16-12mm concave platform
- 110mm x 105mm platform
- CNC Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$112.49
- Dial your fit with Spoon flat pedals available to fit from kid's sizes
- 90mm = US shoe sizes 6 & under / 100mm = US shoe sizes 7~10 / 110mm = US shoe sizes 11+
- Forged chromoly axle which delivers strength and durability
- 16mm-12mm concave profile with 20 preassembled steel pins for added grip
- Shot-peened and anodized to enhance fatigue life
- Recommended for: ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike, KIDS (90x105)
- PLATFORM SIZE (mm): 90x105
- PLATFORM PROFILE (mm): 16—12 concave profile
- WEIGHT +/- (g): 360 / 400 / 420 per set
- AXLE: cold forged chromoly steel
- BEARING/BUSHING: industrial sealed bearing, IGUS bushing
- PINS: 20 steel pins (per pedal)
- TECHNOLOGIES: Chamfered leading edges
- MATERIAL: MGR extruded alloy body, CNC optimized
$89.99
- Large platform size with concave profile combines support with ultimate grip
- Strong and lightweight one piece alloy body in eight color options
- Forged chromoly axle delivers strength and durability
- Shot-peen surface increases fatigue life and impact resistance
- Material: Alloy
- Platform Size (mm): 100 x 105
- Platform Profile: (mm) 16mm
- Weight (g): ±395/set
- Axle: Cold-forged Chromoly steel
- Bearing/Bushing: Industrial bearing, IGUS bushing
- Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity
- Finish: Mottled / grunge anodized
$49.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals.
- Pins available separately
$85.99
- 100% SDG DNA in the design of these pedals
- Utilizes a flat profile which allows optimal grip for flat pedal shoes
- Composite body design
- Minimal 17mm pedal body height maximizes the pedal feel
- 105mm x 110mm Platform
- Ramped and undercut traction pad
- 18 pins, replaceable, bottom loaded
- Bearing/bushing design for maximum durability. Fully rebuildable pedal design
- Cro-Mo axle
$79.99
- 90mm x 90mm Small Platform
- Cro-Mo Axle
- 6 rear loading, replaceable steel pins
- Gripper profile for enhanced pedal traction
- Fully sealed and lightweight DU bushing design
- Pedal Weight: 310g
$79.99
- 90mm x 90mm Small Platform
- Cro-Mo Axle
- 6 rear loading, replaceable steel pins
- Gripper profile for enhanced pedal traction
- Fully sealed and lightweight DU bushing design
$79.99
- 90mm x 90mm Small Platform
- Cro-Mo Axle
- 6 rear loading, replaceable steel pins
- Gripper profile for enhanced pedal traction
- Fully sealed and lightweight DU bushing design
$79.99
Slater pedals from SDG.
- 9/16" spindles
- Composite/plastic
- Platform
$29.99 - $49.99
The super popular Impulse Pedals feature 12 traction pins per side and a knurled, concave body for superior grip. Keep your bike looking fresh and swaggy!
Product Specifications
- Size: 9/16"
- Body: Nylon Composite
- Spindle: Chromoly Steel
- Installation: 15mm Pedal Wrench or 6mm Allen Key
- Pins: 12 molded traction pins per side
- Weight: 14.2oz
$34.99
- Allows a customer to replace their cleats.
- Two replacement cleats in box
$32.99
- Classic BMX-style platform pedal for all-around use across varied disciplines
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 22.5mm height/105mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 405g
$46.99
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 15mm height/100mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 345g
$144.99
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
-Durable 6061 alloy construction with 20 replaceable traction pins (10 per side)
- 13.3mm height/105mm width
- CrMo spindle axle with a smooth running, sealed inner DU bushing/dual-outer sealed bearing system
- Weight: 380g
$93.99
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
- Impact grade Nylon construction with 16 replaceable, metal-pin traction pins (8 per side)
- 13.3mm height / 105mm width
- CrMo spindle axle with a smooth running, sealed inner DU bushing / dual-outer sealed bearing system
- Weight: 350g
$75.99
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction
- 13.3mm height/105mm width
- CrMo spindle axle with a smooth running, sealed inner bushing/dual-outer sealed bearing system
- Weight: 315g
$34.99
- Extra-light design
- 9/16-inch Cro-Mo axle, CNC machined alloy body
- Toe-clip compatible
$31.99
- Lightweight alloy body with steel cage
- Toe-clip compatible
- 9/16-inch Cr-Mo axle
$19.99
- Stability and comfort for city bikes and cruisers
- Non-slip TPE tread has a distinctive grip texture that provides safe traction
- Large platform is supportive and has a dual-concave shape
- Lightweight plastic body with Boron steel spindle
- Reflector Included
- Comfortable for most shoe types
$39.99
- Woven nylon fiber material
- Double hold system for strength
- Durable for urban or MTN riding
- Fits most BMX platform style pedals
- Anti-slip adjustable design
$27.99
- High-strenght Nylon body with injected fiber
- 9/16" Cr-Mo axle
- Ball bearings
$39.99
- Forged alloy body
- Large contact surface, 95 x 95mm
- Replaceable pins
- 9/16 Cr-Mo axle
- 462g
$14.99
Nylon toe clip straps, with zinc-plated steel quick-release buckles.
$14.99
- Strapless resin construction
- Strapless design
- Tough and lightweight, ideal for urban conditions with frequent stops
$49.99
- Rugged nylon construction for the toughest trails
- Large 106x100mm platform provides superior stability
- Concave platform and grip pins offer tenacious grip
- 8 replaceable threaded steel traction pins per side
- Sealed Cro-Mo steel axle with 9/16" spindle
$14.99
- Double tongue resin toe-clips
- Nylon straps with steel buckles
$199.99
The Surge pedals feature CNC'd construction, a low-profile design, sealed bearing/bushing construction and a full set of replaceable pins.
- 6066-T6 alloy CNC body, chromoly axle
- Replaceable pins
- Extremely strong pedal body with recessed spindle cap
- Extra pack replaceable pins & nylon impact ring
- 9/16"
$22.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.
$144.99 - $159.99
Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase.
- Extruded and CNC Machined 6061 T6 Aluminum
- 100mm x 100mm platform
- Concave body
- Fully Serviceable DU Bushing and Double Micro Sealed Bearing System
- Intended Use: Downhill, FR/DJ, Enduro, All Mountain
- Allen bolt style pins
- Additional Allen Pin kit included
$209.99
The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.