Filter By:
Workstands
$479.99
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
$579.99
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube.
• PCS-4-1 uses the 100-5C Adjustable Linkage Clamp.
• Clamp rotates 360º and is adjustable in height up to 67” (170cm)
• Adjusts quickly from 55" to 72"
• Approximate weight 26 lbs (11.8 kg)
NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.
$759.99
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
$29.99
Park's Work Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools and small parts close at hand. It has deep sides so your small items stay put and many slots for holding your tools. The Tool Tray fits Park's PRS-2, PRS-3, PRS-6, PRS-11, PRS-12, PCS-1 and PCS-4 repair stands.
$638.95
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg
- The stand features a new array of precision aluminum and steel parts which offer stiffness and durability
- NEW Jaw mount and rotation system
- Stand is adjustable by height between 980 and 1500mm
$199.99
Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK into the PRS-33.2 version controls and electronics.
$277.99
A bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand. Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal.
- Cam actuated, micro-adjustable clamp allows quick entry and exit and fits 1-inch to 3-inches (25mm–76mm) diameter tubes and seat posts of any shape and material
- Narrow clamping jaws (2.7-inch/7cm) fit into tight areas or on short seat posts
- 360° infinite clamp rotation allows bike to placed in optimal position for specific repairs
- All-steel structure for maximum stiffness and durability
- Super strong glass-filled nylon-composite fittings and top tube internals enable smooth rotation and secure positioning
- Mounts to any flat surface (mounting bolts not included)
Distance from the center of the clamp to the center of the mount is approximately 11 3/4-inch (30cm). Height from bench to center of the clamp axis is approximately 9 7/8-inch (25cm).
Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight.
$91.99
The PCS-EXT is an extension that adds up to 21 inches (53 cm) of adjustable working height to any PCS-1 or PCS-4 repair stand manufactured between June 1996 and December 2001. The kit includes a quick-release collar and extension tube to raise the working height of the stand. The PCS-EXT is required for use of the 106-AC Accessory Collar.
$51.99
The Travel and Storage Bag is a heavyweight nylon bag with a shoulder strap. This bag is designed for transporting and storing your Park Professional Race Stand. It makes travel easy and convenient, while also protecting your stand.
$29.99
The PrepStand Pro Upgrade Kit makes measurement simple. It features a tray for weighing small parts and a hook for weighing larger items. This is a great upgrade for your Topeak PrepStand Pro.
$2,699.99
- Adjustable height from 9" to 78" (23cm-198cm)
- Integrated work tray and PRS-33TT Tool Tray Included
- Integrated accessory bar to hang wheels, air hoses, etc
- Electric motor to smoothly lift up to 120 lbs (54kg)
- Oversized guessets to mount stand directly to the floor
- 100-3D Micro Adjust Clamp
- Two #470 Oversized Machine Thread Hooks
- Full height with base and accessory bar: 94" (239 cm); not using accessory bar reduces height by 2-3/4"
- Base plate 135-33 (900988-01) is not included
$15.99 - $55.99
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp:
- 1002: fits 100-3X and 100-5X extreme range clamps
- 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12
- 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps
- 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps
- 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps
- 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current)
- 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C)
- 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands)
- 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
$104.99
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
$119.99
Weight freaks rejoice! Topeak's Weight Scale is the perfect addition to your PrepStand Pro or PrepStand Elite. It quickly and accurately measures anything from small parts all the way up to bikes and wheels.
$255.99
A versatile and convenient way to keep tools, supplies and technology at arms length on a PRS-33 Power Lift Repair Stand. The PRS-33TT solidly mounts directly to either side of the stand’s upright at any height.
- 19 tool holding holes, slots and small trays in a variety of shapes and sizes
- 14-inch (35cm) magnetic tool bar
- Integrated mounting holes for PTH-1 Paper Towel Holder
- Phone/tablet/clipboard holder
- Pen and pencil holders
- Adjustable utility hook to hang wheels, parts and scales
- Height adjustable
- Can be installed on a fully assembled stand
$608.95
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg
$699.99
Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately).
- 23" x 35" x 7/16" steel plate
- Approximately 118 lbs
- Black painted
$699.99
The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike.
Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport.
The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit.
- Maximum weight capacity*: 36 kg (80 lbs.)
- Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide
- Jaw width: 70 mm (2.75")
- Height adjustable from 97 to 147 cm (38" to 58")
- Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6")
- Weight: 5.7 kg (12.6 lbs.)
- The PRS-26 uses the 100-25D Micro-Adjust Clamp
- Replaceable jaw covers (part #1960)
*NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.
$279.99 - $379.99
After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use.
• #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33
• #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939")
• #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud)
• Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes
• Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes
• Long travel cam handle allows quick entry, adjustment and exit
• Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts.
• Durable, replaceable jaw covers
• Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle
• Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts
• Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments
$379.99
Mount the THS-1 Trailhead Workstation (sold separately) directly to this rigid steel post.
Features:
- 2-inch (5cm) square post plated then powder coated for long outdoor life
- Includes THS-1 mounting fasteners
- 6-inch (15cm) square base with holes to mount directly into hard surface or to Park Tool #130 Base Plate (fasteners not included)
- Height: 62.25-inch (158cm) positioning cradle arms at 50.5-inch (128cm)
$31.99
Park Tool's 106-AC easily adapts the #106 Work Tray or PTH-1 Paper Towel Holder to fit 35mm-37mm upright tubes on PCS-9 Repair Stands, as well as 2003 and newer PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands.
$31.99
The RPP-1 offers simple but effective protection for your service area. This 32" tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand. Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease.
- Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3
- Easily removed and installed with hook-and-loop material
$85.99
Permanently and securely attach your Park Tool Repair Stand (sold separately) to the floor of your shop with Park's Floor Mounting Plate. Made with an 8" square of steel, it attaches to the stand with four bolts, which are included.
$649.99
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.
- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes
- The clamp jaws are nominally 2.75 inches (7cm) wide
- Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability
$499.99
Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.
$595.99
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
$939.99
115 pound (52kg) base plate with floor levelers for the PRS-33 Power Lift Shop Stand
$11.99
The 1971 installs onto the clamps found on most Park Tool repair stands to more securely hold D-shaped seatposts by converting one jaw profile to a flat surface. This is useful for bikes with D-shaped seatposts and other non-traditional designs that would cause a less-than-ideal fit in traditional repair stand jaws. The 1971 is designed to fit over a clamp's existing jaw covers and is easy to remove and install by hand, making it a convenient accessory for your repair stand.
Compatible with the following repair stands:
- PCS-9.2 and PCS-9.3
- PCS-10.2 and PCS-10.3
- 100-3D Micro-Adjust Clamp, as found on PRS-2.2, PRS-2.3, PRS-3.2, PRS-3.3, PRS-33.2
- 100-5D Micro-Adjust Clamp, as found on PCS-4
- 100-25D Micro-Adjust Clamp, as found on PRS-25 and PRS-26
$83.99
Keep your most-needed bike repair tools and supplies close at hand with Park's Work Tray. It easily installs on your Park PRS-15, PRS-10, or PRS-11 Repair Stand (sold separately). And it features 2 separate compartments, a lube holder, a tool/towel bar, a tab system that holds plastic grocery bags and 2 receiver pods for extra accessories.
$47.99
The Travel and Storage Bag is a heavyweight nylon bag with a shoulder strap. This bag is designed for transporting and storing your Park Team Race Stand. It makes travel easy and convenient, while also protecting your stand.
Page 1 of 2
Next page