Wax

Operating range: -5/-15°C | 23/5°F All-purpose grip wax for cold winter conditions. Basic grip wax series for all snow types.

PURE ONE liquid glide waxes are based on the ingredients used in the racing paraf?ns and high-quality solvents, which give excellence performance and good durability to the product. PURE ONE WARM liquid glide waxes are suitable for wet and damp snow. On its best when used on top of liquid base wax. ONE WARM for wet and damp snow, +7°C/-3°C

Created to help keep skin skis clean and to prevent dirt from building up in the skin stripe as well as giving you an improved glide without affecting grip. It will also help prevent ice from building up in the fine hairs of skins. It is fluorine-free for a more environmentally friendly alternative to traditional waxes and agents for cross country skiing. One bottle contains 80ml Temperature Range: 10°C to -1°C

Temperature: Air -6°C to -18°C

Skin impregnation. Ecological impregnation for skin skis/touring ski skins. Ecological protection against water. Application and properties - Ideal for skin skis/touring ski skins - Highly effective due to the latest research findings - Makes the skins water-repellent - Fluor free

Universal liquid wax for all types of snow and temperatures. Application and properties - Based on natural raw materials - Improves sliding properties and cares for the base - Quick and easy to apply - With sponge applicator and integrated polishing felt - Comfortable pocket size to go and wax en route - Biodegradable - Also used as rust protection for ski edges

Aerosol spray on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 150 ml.

Protects the ski base during transport and is easy to use for the next training session. A versatile and medium-hard glide wax. Used by Racing Service and ski factories as a transport wax and as an effective preparation for the next training session. - Wide range of applications, 0°C to -10°C - Easy to apply with a waxing iron - Easy to scrape and brush - Fluoro-free - Transport wax - Medium-hard glide wax

Lightly scented liquid base cleaner. Remove as much wax or klister as possible with a scraper before the base is cleaned and wiped off with Fiberlene paper. The active ingredient is a low aromatic hydrocarbon with good solvent capacity.

A durable basewax for all hard waxes in colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Temperature: Air All Temperatures F4 Universal All Temperature Liquid glide wax is a convenient rub on liquid wax with a foam applicator and felt polisher. Designed for all temperatures and all snow conditions. It can be applied on cross-country skis, alpine skis and snowboards. The pocket sized shape of the bottle allows it to be easily taken out on the trails. After applying the liquid wax polish with a felt brush or fiberlene and brush with a soft nylon brush to increase the durability of the wax. Specifications: -Glide wax for alpine and cross-country skiing -Preservative wax for metal edges -Easy application -100 ml -Glide wax for alpine and cross-country skiing -Preservative wax for metal edges -Easy application -100 ml

Fiberlene cleaning paper. Quality non-lint paper. Suitable for use with waxing irons. - High-quality, durable paper for cleaning skis - Prepping and cleaning paper - Non-dissolving specialty paper - For ski waxers

High Speed 10 liquid yellow is a liquid spray-on training and racing wax that can be used as a stand alone race wax or as a base for liquids and wool-applied top coats. HS10L is a wax for very wet conditions when the snow has turned transformed under warm weather conditions. Ideal for spring skiing when the dirt content typically is high, as HS10L attracts less dirt and trail trash from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms.

Temperature: Air -10°C to -18°C (14°F to 0°F) Glide wax for racing and fast training sessions. HS5 is the hardest glide wax in the High Speed series. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. HS5 is an excellent choice for cold conditions due to its superior durability and dry friction properties. It is an excellent choice for alpine skiing, snowboarding and cross-country skiing. Despite being a wax for cold conditions, its melting point makes it easier to apply than many similar waxes in this area, without compromising its glide properties. For fresh snow, transformed snow and artificial snow. How to apply HS5: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. After about one minute, scrape off with a plexi scraper. It is important to have a good waxing iron in order to melt the wax efficiently. HS5 can be used as a racing wax alone or as a base wax for other racing products. The HS range is available as both a glide wax and as a liquid product. Specifications: -Suitable for alpine skiing, snowboarding and cross-country skiing -Excellent dry friction properties -Replaces LF5X -For training and racing -Fantastic for cold conditions -Improves ski glide -Fluoro-free and 100% biodegradable -Thoroughly tested in different conditions

Temperature: Air -6°C to -12°C (21°F to 10°F) Glide wax for racing and fast training sessions. HS6 is a very versatile glide wax that belongs to the High Speed range. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All glide waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. HS6 can be used as a base wax for racing products or as base prep wax for cold skis. HS6 has good durability and provides excellent glide on both natural and artificial snow. How to apply the glide wax: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. HS6 can be used as a racing wax alone or as a base wax for other racing products. The HS range is available as both hot wax and liquid products. Specifications: -Versatile wax for alpine, snowboarding and cross-country skiing -Very durable -Replaces LF6X -For racing and training -Amazing universal glide wax -Improves ski glide -Fluoro-free and 100% biodegradable -Also available as a liquid glide wax -Thoroughly tested in different conditions

High Speed 6 liquid blue is a liquid spray-on training and racing wax that can be used as a stand alone race wax or as a base for liquids and wool-applied top coats. HS6L is developed for cold conditions, but it is outperformed by traditional paraffin waxes once the temperature is below the maximum temperature range for the liquid (-12°C). HS6L is a versatile wax that works in all snow conditions, but performs at It's best when the humidity is high.

High Speed 7 liquid violet is a liquid spray-on training and racing wax that can be used as a stand alone race wax or as a base for liquids or wool-applied top coats. HS7L performs at It's best at moderate to warmer winter conditions that are below the freezing point. HS7L can handle a wide variety of snow conditions and is not humidity sensitive. It is a safe choice that rarely underperforms when used within Its range.

Temperature: Air -2°C to -8°C (28°F to 18°F) Glide wax for racing and fast training sessions. HS7 is great for normal winter conditions below freezing. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All glide waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. The hardness makes it easy to work with and it is easy to achieve a good end result. Swix HS7 is great for both training and racing. How to apply HS7: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. HS7 can be used as a racing wax alone or as a base wax for other racing products. HS7 is available as both wax and liquid products. Specifications: -Versatile wax for alpine, snowboarding and cross-country skiing -Perfect base wax for powder wax and topping wax -Replaces LF7X -For training and racing -Amazing universal glide wax -Improves ski glide -Fluoro-free and 100% biodegradable -Thoroughly tested in different conditions

High Speed 8 liquid red is a liquid spray-on training and racing wax that can be used as a stand alone race wax or as a base for liquids or wool-applied top coats. HS8L is an extremely versatile wax on both sides of the freezing point. It performs in older snow below freezing, new fresh snow above freezing and has proven to work well in every other condition that is within Its temperature range. HS8L is a must have in warm weather conditions.

Temperature: Air -4°C to +4°C (25°F to 39°F) Glide wax for racing and fast training sessions. HS8 is a popular glide wax for both base preparation and training. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. HS8 is easy to melt and very convenient to work with. It is equally suited for both training and racing. How to apply HS8: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. HS8 is available as both wax and liquid products. Specifications: -A favourite for Nordic skiing disciplines -A good base wax for topping wax -Replaces LF8X -For training and racing -Easy to work with -Improves ski glide -Fluoro-free and 100% biodegradable -Thoroughly tested in different conditions

The number one fluoro remover. I94 Pro Cleaner is a liquid ski cleaner designed for effective and gentle removal of fluoro, dirt, wax, and silicone residues. Trusted by the Norwegian Ski Federation’s wax teams, it offers superior cleaning power for keeping your skis and gear fluoro-free and in top condition. - Effective fluoro and dirt removal. - Gentle on skis and equipment. - Removes wax and silicone residues. - Trusted by top Norwegian wax teams. - Essential for maintaining clean, race-ready skis.

A hard and extra durable glide wax designed for long-distance racing. Developed specifically for newer, clean snow, it performs exceptionally well in warm conditions while remaining competitive in colder weather. The recommended iron speed is 8-10 seconds per skating ski. For enhanced durability, reheat the wax after cooling to room temperature (10 minutes). Scrape after approximately one minute. Using a high-quality iron is key for efficient melting. Marathon waxes can be used as a standalone race wax or as a base for top coats. Minimum iron temperature: 155°C (311°F). - A favorite for classic long-distance races like the Birkebeiner - Powder version of the acclaimed marathon wax - The powder makes it easier to achieve an excellent result

Temperature: Air -14°C/-32°C (7°F to -26°F) Glide wax for skiing in extra cold conditions. A cold glide wax for extreme cold, which can be used alone as a racing wax when air humidity is low. It works very well on artificial snow and has excellent durability. In the warmest part of the temperature range, and at high humidity, racing products waxed on top will boost performance. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Replaces CH4X Specifications: -Excellent dry friction properties -Superior durability -Very good on artificial snow -For training and racing

Temperature: Air -10°C to -18°C (14°F to 0°F) Glide wax for ski trips, training and base prep. The PS5 is the hardest wax in the series and is an excellent choice in cold conditions due to its superior wear resistance and dry friction properties. PS5 is a great choice for both alpine and cross-country skiers. Despite being a wax for cold conditions, its melting point makes it easier to apply than many similar waxes in this area, without compromising its glide properties. PS5 works well on all types of snow in cold conditions. From fresh snow to transformed snow and artificial snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. PS5 can be used as a racing wax alone or as a base wax for other racing products. Replaces CH5X. Specifications: -An all-round glide wax for alpine and cross-country skiing -Excellent dry friction properties -Replaces CH5X -For ski trips, training and racing

Temperature: Air -6°C to -12°C (21°F to 10°F) Glide wax for ski trips, training and base prep. PS6 is a very versatile glide wax. The area of application ranges from being a base wax for racing products to a racing wax by itself, and as a base-prep wax for cold skis. PS6 has good durability and provides excellent glide on both natural and artificial snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. PS6 can be used as a racing wax alone or as a base wax for final wax layers. Replaces CH6X. Specifications: -An all-round glide wax for alpine and cross-country skiing -High durability -Replaces CH6X -For ski trips, training, racing and base-prepping skis -60 grams

PS6 Liquid Blue 80ml is a versatile liquid glide wax with recommended temperature range -6°C to -12°C. The wax works perfectly as a base wax for racing products to a racing wax by itself and a base-prep wax for cold skis. PS6 Liquid Blue provides good durability and excellent glide on natural and artificial snow. The bottle includes a sponge applicator for easy application. Apply the wax using the sponge, let dry for 2 minutes, and then brush with a soft nylon brush (T166B) for optimal performance.

Temperature: Air -2°C to -8°C (28°F to 18°F) Glide wax for ski trips, training and base prep. PS7 is a wax that works well in normal winter conditions, below freezing. The hardness makes it easier to work with and it is easier to get a good end result. PS7 is a very good ski trip and training wax as well as a good all-round base prep wax. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Replaces CH7X. Specifications: -A versatile wax for alpine and cross-country skis -A good wax for base preparation -Replaces CH7X -For ski trips, training, racing and base-prepping skis

PS7 liquid is a very versatile liquid glide wax for -2C to -8C, 80ml. PS7 liquid provides good durability and excellent glide on natural and artificial snow. PS7 can be used as a racing wax alone or as a base wax for final wax layers.

emperature: Air -4°C to +4°C (25°F to 39°F) Glide wax for ski trips, training and base prep. PS8 is an affordable wax for ski trips and training. Also works very well as a base preparation wax. Easy to melt and very convenient to work with. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Replaces CH8X. Specifications: -Covers both sides of zero -Low melting point and easy to apply -Replaces CH8X -For ski trips, training, racing and base prepping skis -180 grams -Covers both sides of zero -Low melting point and easy to apply -Replaces CH8X -For ski trips, training, racing and base prepping skis

PS8 Liquid Red 80ml is a versatile liquid glide wax with recommended temperature range -4°C to +4°C. The wax works perfectly as a base wax for racing products to a racing wax by itself and a base-prep wax for cold skis. PS8 Liquid Red provides good durability and excellent glide on especially finegrained snow. The bottle includes a sponge applicator for easy application. Apply the wax using the sponge, let dry for 2 minutes, and then brush with a soft nylon brush (T166B) for optimal performance.