Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Hubs

SRAM MTH 746 Rear Hub
$150.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
Stan's NoTubes 3.30/3.30Ti QR Hub Kit
$34.99
Stan's 3.30/3.30Ti 9mm Hub Kit makes Stan's 3.30 front hubs compatible with a standard quick-release. Installation is easy—just pull the old ones off and put the new ones on.
SRAM MTH 716 Front Hub
$117.50
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
Shimano Alfine S7001 11-Speed Disc Brake Rear Hub
$571.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible
Spank Spike R150/157 XD Hub
$249.99
- Traditional 32 hole J-Hook Hub light weight, high performance - Offering sharp engagement without compromising durability - Adaptability between 150 and 157 configuration - Shimano Standard/Steel XD drivers available
SRAM 900 Front Hub
$107.00 - $111.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
DT Swiss 240s Road Front Hub
$344.99 - $348.99
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.
DT Swiss 240s Road Rear Hub
$669.99 - $683.99
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. Lace it up and it'll roll for thousands of nearly frictionless miles. The legendary Ratchet System ensures precise engagement and exceptional dependability, no matter how hard you stomp on the pedals.
DT Swiss 350 Road Front Hub
$105.99 - $117.99
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.
DT Swiss 350 MTB Center Lock Rear Hub
$345.99 - $389.99
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.
DT Swiss 350 MTB 6-Bolt Rear Hub
$345.99 - $389.99
DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors
DT Swiss 240s MTB 6-Bolt Front Hub
$337.99 - $370.99
The DT Swiss 240s MTB 6-Bolt Front Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
SRAM 900 Rear Hub
$279.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
Profile Design Shimano Freehub Body - Twenty-Four Series
$159.99
Replacement Shimano / SRAM Freehub body for a Twenty-Four Series road rear wheel (11-speed).
SRAM X0 Rear Hub
$494.99 - $520.99
SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.
SRAM Predictive Steering Hub
$334.00
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.
SRAM X0 Front Hub
$267.99 - $277.00
Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - SPEEDBALL precision cartridge bearings for light, smooth action - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes
WeThePeople Arrow Front Hub
$142.99
An evolution of their world-renowned Supreme hubs, the WeThePeople Arrow hubs are a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. The 7075-T6 alloy axle and knurled CNC machined cones help keep this hub incredibly light, and give it a super smooth look unlike any other front hub on the market.
Cinema BMX FX2 Freecoaster Rear Hub
$289.99 - $299.99
The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/ Guards Installed)
SRAM X0 Thru Axle Rear Hub
$494.99 - $510.00
Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. From pawl tooth to side cap, SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - DOUBLE TIME ratchet mechanism for durable, quick engagement - SPEEDBALL precision cartridge bearings for light, smooth action. No play adjustment needed for simplicity and convenience - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes - 150mm version includes 12x150mm & 12x157mm endcaps
Spank Oozy Trail Hubs
$149.99 - $274.99
SPANK's new OOZY Trail Hubs are a huge step forward in straight pull hub design and manufacturing. The OOZY Trail Hub has unique oversized straight pull flanges, and a 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing, offering added spoke strength, wheelset stiffness, and spoke torque retention never before seen in straight pull designs. The SSL (single spoke length) flanges offer ultimate ease and convenience of maintenance. SPANK's end cap system is compatible with SPIKE hubs, and makes conversion between 135 and 142mm rear spacing simple — in QR, 10mm, or 12mm axle diameters. 30T engagement and tried and true 3 pawl system deliver a good blend of quick pick up and trustworthy durability. Like the benefits and techie look of straight pull hubs but not the 28H drawback of traditional designs? Then OOZY Trail Hubs are the answer.
SRAM 900 Rear Hub
$279.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Includes Quick Release & 12x142mm Through AxleCaps - Fully convertible with tool free end caps - DOUBLE TIME mechanism offers smooth,quick and durable engagement - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Axle type: Conversion Caps included - Spoke holes: 24 - Brake compatibility: Disc (6-bolt) - Driver Mechanism: Double Time - Four Pawl - Axle material: Tapered aluminum - Driver body material: Aluminum - Hub shell: Aluminum - Seeker angled flanges - Oversized body
WeThePeople Supreme Front Hubs
$124.99
The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts
Stan's NoTubes 3.30/3.30Ti Hub Kit
$30.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Shimano Deore XT Rear Hub
$119.99
Quick-Release Model • Model Number: FH-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Over Locknut: 135mm • Axle Length: 146mm • Axle Diameter: 15mm • QR Skewer Length: QR skewer length : 168, 173mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 45mm • Center to Flange (Left): 44mm 12x142mm Thru-Axle Model • Model Number: FH-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 12mm E-Thru • Over Locknut: 142mm • Axle Length: 142mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 45mm • Center to Flange (Left): 44mm • Center to Flange (Left): 44mm
SRAM X0 Front Hub
$350.00
SRAM's X0 Hub stops at nothing for a lightweight hub that's worthy to wear the X0 name. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the tapered aluminum axle delivers strength with minimal weight. It's equipped with standard 6-bolt rotor mounts and is convertible from quick-release to 15mm to 20mm through-axles.
WeThePeople Arrow Rear Hub
$289.99
An evolution of their world-renowned Supreme hubs - the Arrow Rear Hub from WeThePeople is a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. Using the same bombproof Q-Lite internals and "IGUS" bushing driver as the Supreme Cassette, the Arrow's 7075-T6 alloy axle, and knurled CNC-machined cones help keep this hub incredibly light and give it a super smooth look unlike any other hub on the market.
Shimano Deore XT M756A 10-Speed 6-Bolt Disc Rear Hub
$70.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
DT Swiss 240s MTB Center Lock Rear Hub
$669.99 - $719.99
The DT Swiss 240s MTB Center Lock Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.
DT Swiss 240s MTB 6-Bolt Rear Hub
$659.99 - $719.99
The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
Page 1 of 3 Next page