Accessories and Wax

PURE ONE liquid glide waxes are based on the ingredients used in the racing paraf?ns and high-quality solvents, which give excellence performance and good durability to the product. PURE ONE WARM liquid glide waxes are suitable for wet and damp snow. On its best when used on top of liquid base wax. ONE WARM for wet and damp snow, +7°C/-3°C

Created to help keep skin skis clean and to prevent dirt from building up in the skin stripe as well as giving you an improved glide without affecting grip. It will also help prevent ice from building up in the fine hairs of skins. It is fluorine-free for a more environmentally friendly alternative to traditional waxes and agents for cross country skiing. One bottle contains 80ml Temperature Range: 10°C to -1°C

Aerosol spray on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 150 ml.

A durable basewax for all hard waxes in colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

All-round combi brush for brushing ski and snowboard bases after waxing. Rectangular all-round brush with bronze (Ø 0.15mm) and nylon bristles (Ø 0.12 mm.). For brushing and polishing simple liquid and paste glide waxes. Specifications: -Combi brush -For brushing glide wax -Ergonomically designed

Temperature range from -4°C to +4°C. Recommended waxing iron temp.: 130°C. A continuance of our standard CH8. A cost-effective training and racing wax, and base prep wax for hot skis. Easy to melt and very convenient to work with. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Made for Base Preparation

Practical combi-cork for polishing wax and liquid glide wax High-quality natural cork with felt on one side. For polishing wax and liquid topping products for cross-country and alpine bases. Specifications: -Natural cork with felt -For polishing glide wax and liquid glide wax Small: 44 mm x 66 mm x 34 mm thick. Large: 110mm x 65mm x 30mm thick

Simple and easy strap for XC. Takes skis 45 mm wide. No padding and no Velcro.

Ski straps for cross-country skis with base protector. 35 mm height.

Combo pack of Swix`s 3 levels of Fibertex: Coarse, Fine, and X-Fine.

Natural cork for polishing glide wax Natural cork. Use to cork the wax into the base. Size 44 mm x 66 mm x 31 mm thick. Specifications: -Natural cork for polishing glide wax -Small and handy

Temperature: Air -10°C to -18°C (14°F to 0°F) Glide wax for racing and fast training sessions. HS5 is the hardest glide wax in the High Speed series. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. HS5 is an excellent choice for cold conditions due to its superior durability and dry friction properties. It is an excellent choice for alpine skiing, snowboarding and cross-country skiing. Despite being a wax for cold conditions, its melting point makes it easier to apply than many similar waxes in this area, without compromising its glide properties. For fresh snow, transformed snow and artificial snow. How to apply HS5: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. After about one minute, scrape off with a plexi scraper. It is important to have a good waxing iron in order to melt the wax efficiently. HS5 can be used as a racing wax alone or as a base wax for other racing products. The HS range is available as both a glide wax and as a liquid product. Specifications: -Suitable for alpine skiing, snowboarding and cross-country skiing -Excellent dry friction properties -Replaces LF5X -For training and racing -Fantastic for cold conditions -Improves ski glide -Fluoro-free and 100% biodegradable -Thoroughly tested in different conditions

Temperature: Air -6°C to -12°C (21°F to 10°F) Glide wax for racing and fast training sessions. HS6 is a very versatile glide wax that belongs to the High Speed range. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All glide waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. HS6 can be used as a base wax for racing products or as base prep wax for cold skis. HS6 has good durability and provides excellent glide on both natural and artificial snow. How to apply the glide wax: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. HS6 can be used as a racing wax alone or as a base wax for other racing products. The HS range is available as both hot wax and liquid products. Specifications: -Versatile wax for alpine, snowboarding and cross-country skiing -Very durable -Replaces LF6X -For racing and training -Amazing universal glide wax -Improves ski glide -Fluoro-free and 100% biodegradable -Also available as a liquid glide wax -Thoroughly tested in different conditions

Temperature: Air -2°C to -8°C (28°F to 18°F) Glide wax for racing and fast training sessions. HS7 is great for normal winter conditions below freezing. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All glide waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. The hardness makes it easy to work with and it is easy to achieve a good end result. Swix HS7 is great for both training and racing. How to apply HS7: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. HS7 can be used as a racing wax alone or as a base wax for other racing products. HS7 is available as both wax and liquid products. Specifications: -Versatile wax for alpine, snowboarding and cross-country skiing -Perfect base wax for powder wax and topping wax -Replaces LF7X -For training and racing -Amazing universal glide wax -Improves ski glide -Fluoro-free and 100% biodegradable -Thoroughly tested in different conditions

Temperature: Air -4°C to +4°C (25°F to 39°F) Glide wax for racing and fast training sessions. HS8 is a popular glide wax for both base preparation and training. High Speed (HS) is specially developed for younger racers and ambitious leisure skiers. All waxes in this series offer high performance and good durability. This makes them an affordable option for both competition and training. HS8 is easy to melt and very convenient to work with. It is equally suited for both training and racing. How to apply HS8: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. HS8 is available as both wax and liquid products. Specifications: -A favourite for Nordic skiing disciplines -A good base wax for topping wax -Replaces LF8X -For training and racing -Easy to work with -Improves ski glide -Fluoro-free and 100% biodegradable -Thoroughly tested in different conditions

T157B BRUSH RECTANGULAR, HORSEHAIR Horsehair brush. Ø ca. 0.15 mm. Second brush or all round brush on Cera F. 5 to 10 strokes.

Medium bronze brush. 0.15 mm. First brush used after scraping. For brushing glide wax out of the structure. 10 strokes.

Great together with SWIX glide wax cleaner! All-round nylon brush. T0161B

Temperature: Air -14°C/-32°C (7°F to -26°F) Glide wax for skiing in extra cold conditions. A cold glide wax for extreme cold, which can be used alone as a racing wax when air humidity is low. It works very well on artificial snow and has excellent durability. In the warmest part of the temperature range, and at high humidity, racing products waxed on top will boost performance. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Replaces CH4X Specifications: -Excellent dry friction properties -Superior durability -Very good on artificial snow -For training and racing

Temperature: Air 0°C to +10°C (32°F to 50°F) Glide wax for base prep, ski trips and training in warm conditions. PS10 is an affordable wax for ski trips and training. Also works very well as a base preparation wax. Easy to melt and very convenient to work with. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Replaces CH10X. Specifications: -A versatile wax for warm conditions -Low melting point and easy to apply -Replaces CH10X -For ski trips, training, racing and base-prepping skis

Temperature: Air -10°C to -18°C (14°F to 0°F) Glide wax for ski trips, training and base prep. The PS5 is the hardest wax in the series and is an excellent choice in cold conditions due to its superior wear resistance and dry friction properties. PS5 is a great choice for both alpine and cross-country skiers. Despite being a wax for cold conditions, its melting point makes it easier to apply than many similar waxes in this area, without compromising its glide properties. PS5 works well on all types of snow in cold conditions. From fresh snow to transformed snow and artificial snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. PS5 can be used as a racing wax alone or as a base wax for other racing products. Replaces CH5X. Specifications: -An all-round glide wax for alpine and cross-country skiing -Excellent dry friction properties -Replaces CH5X -For ski trips, training and racing

Temperature: Air -6°C to -12°C (21°F to 10°F) Glide wax for ski trips, training and base prep. PS6 is a very versatile glide wax. The area of application ranges from being a base wax for racing products to a racing wax by itself, and as a base-prep wax for cold skis. PS6 has good durability and provides excellent glide on both natural and artificial snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. PS6 can be used as a racing wax alone or as a base wax for final wax layers. Replaces CH6X. Specifications: -An all-round glide wax for alpine and cross-country skiing -High durability -Replaces CH6X -For ski trips, training, racing and base-prepping skis -60 grams

PS6 Liquid Blue 80ml is a versatile liquid glide wax with recommended temperature range -6°C to -12°C. The wax works perfectly as a base wax for racing products to a racing wax by itself and a base-prep wax for cold skis. PS6 Liquid Blue provides good durability and excellent glide on natural and artificial snow. The bottle includes a sponge applicator for easy application. Apply the wax using the sponge, let dry for 2 minutes, and then brush with a soft nylon brush (T166B) for optimal performance.

Temperature: Air -2°C to -8°C (28°F to 18°F) Glide wax for ski trips, training and base prep. PS7 is a wax that works well in normal winter conditions, below freezing. The hardness makes it easier to work with and it is easier to get a good end result. PS7 is a very good ski trip and training wax as well as a good all-round base prep wax. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Replaces CH7X. Specifications: -A versatile wax for alpine and cross-country skis -A good wax for base preparation -Replaces CH7X -For ski trips, training, racing and base-prepping skis

PS7 liquid is a very versatile liquid glide wax for -2C to -8C, 80ml. PS7 liquid provides good durability and excellent glide on natural and artificial snow. PS7 can be used as a racing wax alone or as a base wax for final wax layers.

emperature: Air -4°C to +4°C (25°F to 39°F) Glide wax for ski trips, training and base prep. PS8 is an affordable wax for ski trips and training. Also works very well as a base preparation wax. Easy to melt and very convenient to work with. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Replaces CH8X. Specifications: -Covers both sides of zero -Low melting point and easy to apply -Replaces CH8X -For ski trips, training, racing and base prepping skis -180 grams -Covers both sides of zero -Low melting point and easy to apply -Replaces CH8X -For ski trips, training, racing and base prepping skis

PS8 Liquid Red 80ml is a versatile liquid glide wax with recommended temperature range -4°C to +4°C. The wax works perfectly as a base wax for racing products to a racing wax by itself and a base-prep wax for cold skis. PS8 Liquid Red provides good durability and excellent glide on especially finegrained snow. The bottle includes a sponge applicator for easy application. Apply the wax using the sponge, let dry for 2 minutes, and then brush with a soft nylon brush (T166B) for optimal performance.

SWIX Blue Glide is a liquid glider with wide range on the cold side. -4°C to -15°C (25°F to 5°F). For all snow conditions. A good and easy option for the skier who cares for good glide and smooth turning skis and boards with the least possible preparation time. Easy application and dries quickly! 80 ml/2.7 fl.oz.

SWIX Red Glide is a liquid wing for wet snow conditions. 0°C to +10°C (32°F to 50°F). For all snow conditions. A good and easy option for the skier who cares about good glide and smooth turning skis and boards with the least amount of prep time. Easy application and dries quickly! Advantages : Quality Fast drying Technical features: Custom made for hot conditions No need for an iron

Temperature: Air +1°C to -6°C (34°F to 22°F) Liquid glide wax that glides well quickly and easily. SWIX Violet Glide is a fluid glide wax with a wide range of applications for all types of snow around zero degrees, +1°C to -6°C. A smart and simple alternative for skiers who want fast, easy-to-ride skis with the least amount of preparation. Simple application and fast drying time! Specifications: -For those who want a better skiing experience -Excellent glide in no time -80 ml