Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

$97.99 - $104.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
$79.99 - $84.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$57.49
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
$109.99 - $114.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
$104.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
$69.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
$59.99
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
$219.99
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
$219.99
XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.
$53.00
A strong and light trail riser bar designed to tackle the roughest singletrack. - 6061 aluminum alloy - 7 degree rearward / 5 degree upward sweep - 20mm rise
$75.00
An ultra-lightweight 7050 aluminum trail riser bar designed for maximum singletrack shredding. - Lightweight, optimized 7075 aluminum alloy - Micro-adjust laser-etched setup markings - 35mm handlebar diameter - 9 degree rearward/ 5 degree upward sweep - 20mm rise
$109.99 - $124.99
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships! - 800mm width - Designed for DH / Enduro / All MTN applications - Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018 - Incredibly detailed two-tone bead blast and polished ano finish - 9-degree bend / backsweep by 5-degree upsweep - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Designed for maximum ride quality with a 31.8mm bore - World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven - The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams - Features measured cut marks and center alignment detail - Covered by our Lifetime Crash Replacement Policy to the original owner - 15mm rise: 333g - 25mm rise: 342g - 38mm rise: 343g
$109.99 - $124.99
When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams
$214.99
Contend with rocky trails behind the brute strength of the Line Pro Carbon handlebars. OCLV carbon construction in an oversized 35mm diameter provides you with a lightweight mountain bike handlebar that delivers exceptional strength for the toughest trails. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 15mm or 27.5mm rise helps you dial in the perfect position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization
$59.99
- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum
$104.99
- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum
$137.99
Based on his incredibly popular 4-piece handlebar, we worked with WeThePeople pro, Felix Prangenberg, on a 2-piece version to allow him to switch it up from time to time. Using fully heat-treated and multiple-butted Japanese chromoly tubing, the new Pathfinder 2-piece bar feels just like the original 4-piece but with the classic 2-piece look and a lower weight. The Pathfinder 2-piece handlebar features an oval crosstube for improved strength and dent resistance. MATERIAL: - Full liquid post heat-treated 4130 "M2" crmo TUBING: - Multiple butted chromoly RISE: - 9" / 9.6" WIDTH: - 28" BACKSWEEP: - 11.5 degrees UPSWEEP: - 3 degrees SPECIAL FEATURES - "Pre-cut" to 28" - Oval crosstube for dent resistance and strength
$109.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
$283.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7
$109.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
$283.00
RIP, NO RATTLE. Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 35.0mm - Width: 800mm - Material (HB): Carbon - Rise (HB): 25mm - Type (bar): Riser - Backsweep (degrees): 9 - Upsweep (degree): 5
$249.99
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
$283.00
It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm - Material (HB): Carbon - Rise (HB): 20mm - Type (bar): Riser - Upsweep (degree): 5
$283.00
It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm, 800mm - Material (HB): Carbon - Rise (HB: 25mm - Type (bar): Riser - Upsweep (degree): 5
$72.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
$139.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
$149.99
- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos
$109.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
$139.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos
$169.99
- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics
Page 1 of 2 Next page