Skip to main content

Filter By:

Parts & Accessories

Tacx E-Thru Trainer Axle
$49.99 - $64.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Tacx Trainer Tire 700
$62.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Saris 142X12 Boost Thru Axle Adapter
$79.99
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
CycleOps Trainer Thru Axle Adapter
$67.49
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Tacx Direct Drive Freehub Body, Campagnolo
$114.99
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
Tacx Direct Drive Quick Release with Adapter Set
$84.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
Tacx Roller Drive Belt
$15.99
Replacement roller belt for Tacs roller trainers.
Tacx Sweat Cover
$39.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
Tacx Sweat Cover for Smartphones
$49.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
Tacx Towel
$29.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm
Tacx Trainer Bag
$139.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
Tacx USB ANT+ Antenna
$99.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Saris 148x12 Trainer Thru Axle Adapter
$79.99
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Saris ANT+ USB Adapter for PC
$53.99
Connect your PC to CycleOps VirtualTraining.
Saris BLE USB Adapter for PC
$39.99
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Saris Leveling Block
$26.99
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Saris Sweat Guard
$39.99
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
Saris Trainer Clutch Knob Upgrade/Replacement Kit
$39.99
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Minoura ANT+ Minoura Heart Rate Monitor With Belt
$99.99
Minoura Training Accessories like the ANT+ Minoura Heart Rate monitor with belt is a fantastic complement to your favorite trainer or roller. - Pickup and transmit your heart rate data with a comfortable fit - Low energy ANT + (2.4GHz) wireless protocol - Minoura is an official ANT + Alliance member - Universal on every ANT + device - Net Weight: 67 grams (including battery) - Battery: 1 x CR2032
Minoura ANT+ Speed/Cadence sensor (SPD/CD Separate type)
$104.99
Minoura Training Accessories like the ANT+ Minoura Speed/Cadence sensor (SPD/CD Separate type) are a fantastic complement to your favorite trainer or roller. - Pickup and transmit the speed and cadence data - Separate type - Low energy ANT+ wireless protocol - Minoura is an official ANT+ Alliance Member - Universal on every ANT+ device
Kinetic Internal Chain Actuated Cone Cup
$26.99
The Internal Chain Actuated Cone Cup is designed to work with chain actuated internal rear hubs, including Sturmey Archer. It also works perfectly with pre-2018 Brompton folding bicycles.
Kinetic Small Wheel Adapter
$64.99
Kurt's Small Wheel Adapter attaches to your Kurt Kinetic trainer and raises the resistance unit so you can use your trainer with small-wheeled bikes. This adapter works with bike wheels as small as 16 inches in diameter. Comes in two varieties to work with both old and new Kurt Kinetic trainers. • T-580 Small Wheel Adapter for use with all 2013 and newer trainer models. • Old trainer style uses T-500
Kinetic Threaded Shallow Cone Cup
$24.99
This cone cup replaces the threaded cone cup on pre-2013 Rock and Roll trainers and is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version. - Only compatible with the Rock and Roll trainer - This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup) - Use this cone cup on the drive-side of the Rock And Roll trainer (it is not necessary to replace both cone cups)
Feedback Sports Sweat Guard
$24.99
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our absorbent Sweat Guard is designed to keep your carbon, aluminum and steel frame and components safe from corrosive sweat while mimicking your favorite spin class at home. And because your cycling training plan asks for incredibly intense efforts, the Sweat Guard ensures not a drop of sweat will hit your frame during leg-busting intervals. Add a Floor Mat to your indoor cycling collection and you’ve got a training party! - Ultra absorbent terry cloth material - Protects carbon, aluminum, and steel frames and components - Adjustable to fit most any bike - Simple setup and removal with Velcro handlebar mounts and elastic seatpost strap - Machine washable, cold
CycleOps ANT+ Micro USB Adapter
$15.99
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Saris 142x12 Trainer Thru Axle Adapter
$66.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Page 1 of 1