Parts & Accessories

Give your tires a little personality. Your friendly reminder to pump up those tires. - Fashion or function, it's up to you to decide. - Simply screw onto your standard valve for instant bike rack cred. - No tools required for installation - Set of two valve caps

Designed for high pressure tires (over 70 PSI) -Ultra durable plyurethane

- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion - Suitable for all kinds of punctures - Convenient plastic case is compact and easy to carry on every ride - No glue needed

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level. - 5-pack

- Available in 1.5mm & 3mm plug sizes. - 6 plugs per pack, in 2 sheets of 3 plugs - Designed to fit perfectly into the body of Peaty’s Holeshot Tyre Puncture Plugger tool - Packaged using recycled cardboard header cards and biodegradable bags

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.

5 x 1,5mm Slugs & 5 x 3,5mm Slugs

VersaValve dealer kit refills

Knurled 6061 aluminum valve caps for a little touch of swag. - Material: Knurled 6061 Aluminum - Valve Type: Schrader

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

Made from high-quality polyester that is light, yet withstands high pressures. The special adhesive prevents slipping under high loads and temperatures. Pair-set with valve hole. - Max: 145 psi - Sold in pairs (boxed)

- Shim adds support to Presta stem used in a Schrader rim

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.

- For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

- Parts to refill dealer kits or to be used as needed - Universal fit one valve for all types of rims - VersaValve alloy Presta valve stems have large sturdy bases that ensure solid contact with the rim bed - Valves include two different types of gromm

Tubeless Universal Valve—SRAM MTB - Removable Valve Core - Includes 1 tubeless valve & 1 valve core wrench Compatible With: WH-RISE-60-B1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-A1, WH-ROAM-60-B1

For high pressure (Presta) valve with removable valve core. - Tubeless compatible - Valve core removal key included - Aluminum - 2 per set - 12g

Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.

This rim tape is crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Tape is designed for wider Plus and Fat wheels - Can also be used as a universal tubeless solution for non-Bontrager rims - Use only with Bontrager TLR rim valve with round base - Rim tape replacement is recommended if removed from the wheel - One roll is 5m (197") in length

- CNC machined 7075 alloy construction - Sealed base prevents high pressure leaking - Designed to work with Aero dish rims - 30mm, 50mm and 70mm available

Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g

Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox