Tools

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

Park's Cyclone Chain Scrubber is made of durable materials throughout and features an extra-large solvent reservoir, a series of rotating brushes, and a two-step cleaning process to get chains really clean without removal. There's even a strong magnet that draws metal particles scrubbed from the links to the bottom of the reservoir, preventing redistribution. And, the Cyclone's large handle makes it easy to hold and fill.

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Designed for the casual cyclist, the economical WTK-2 contains the tools needed for many basic adjustments and repairs at home or on the road.

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-7 is a dual sided wrench that features a 30mm opening on one end and a 32mm opening on the other.

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life

The MTC-10 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 3, 4, 5 and 8mm hex wrenches - T25 Torx compatible driver - Combo cross/straight tip screwdriver - Key ring holder - Weight: 60g (2.12 ounces)

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability.

Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.

These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel

This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.

A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. The SK-4 includes: - AWS-10 Fold-Up Hex Wrench Set - BBB-4 Big Blue Book of Bicycle Repair - CC-3.2 Chain Checker - CN-10 Professional Cable and Housing Cutter - CT-5 Mini ChainBrute Chain Tool - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HR-8 8mm Hex Wrench - MLP-1.2 Master Link Pliers - SD-2 Shop Screwdriver: #2 Phillips - SW-7.2 Triple Spoke Wrench - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy to use, affordable and it works on nearly any bicycle spoke, no matter its diameter, material or shape.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).

Park's Torx Wrench Set is just what you need to make repairs on many of your bike parts that use Torx (star-shaped) fittings, such as disc brakes, pedals, chainring bolts, and others. It offers the common bicycle wrench sizes (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Its composite handle is super strong, comfortable to use and slip resistant.

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

All your trailside tools, always on your bike and instantly accessible The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast. Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical. NEW FOR 2020 - Easier to remove from your bike, with a lower friction design. - Updated Chain Breaker is easier to use and has a steel body for increased durability - Stronger steel Spoke Keys - Black Multi-Tool - Tubeless plug jabber cover (Small storage capsule) - TOOL FEATURES (20 functions, 130g) - Includes a 10 function Multi-Tool, Tire Lever and Chain Breaker. MULTI TOOL FEATURES (10 functions, 58g) - 2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx. Flat Head Screwdriver. EDC Top Cap Tool - The EDC Tool contains no loose, easy to lose driver bits - Ultra compact and super lightweight. TIRE LEVER/CHAIN BREAKER FEATURES - Tire Lever, Chain Breaker, 0,1,2,3 Spoke Keys, Presta Valve Core Tool, Spare Rotor Bolt CARRIER FEATURES - Spare Quick Link Storage - 12,16, 20g CO2 Cartridge Storage or 2 x Sealed Storage Capsules STORAGE CAPSULE - The V2 EDC tool now comes with a small and a large sealed storage capsule. The new small capsule is used to cover your jabber and preloaded bacon strip keeping it sticky for longer. The small capsule can be used with EDC Threaded options. It also allows you to use the EDC tool and tubeless plug kit inside the small 70cc OneUp pump. The large capsule only fits inside an EDC Threaded setup, EDC Stem or 100cc pump. The small capsule can be installed inside the large capsule for separating items. Storage Capsule Suggested Pack List (not included): Cash ($20 Note), Zip ties, Park TB-2 Emergency Tire Boot, Waterproof matches, Glueless patches. EDC TOOL STORAGE OPTIONS - The EDC Tool was designed to be stored inside your stem/steerer tube or inside the high volume, CNC Aluminum, EDC Pump with integrated CO2 inflator head. Grabbing your EDC tool from the pump is as easy as reaching for your water bottle. COMPATIBILITY - Backwards compatible with all V1 EDC Tool storage options.

- Muc-Off's 3 most popular brushes in an handy pack - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels

- Designed to clean your bike frame and components while caring for delicate finishes - Tough impact resistant dual density handle that won’t slip in extreme conditions - Oversized head for fast cleaning of large areas - Rubberized impact zones for maximum protection

- Everything you need for a quick fix on the road - 3 tire levers - Patch Kit - 9-function multi-tool - CO2 inflator with 2 16g CO2 cartridges - Seat bag

- Includes everything for a quick fix while on or off-road - Liv seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

Combining style, technology and ultimate value, the Rap II series bike multi tools provide unmatched performance at their price points. Engineered and manufactured in-house, these multi tools feature a number of innovative features. The ergonomic side-plates are machined from lightweight aluminum, anodized black, and offer a custom magnetic holder for an emergency quick-link. The steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. Each configuration features up-to-date options for all modern bicycles; including gravel bikes, mountain bikes, e-bikes, and road bikes. Compact and versatile, these mini tools are built to last and designed to efficiently get riders back on the road or trail. - Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Weight: 148g Tool bits: - Quick link holder - Hex 2/2.5/3/4/5/6/8mm - Torx T10/T25 - Phillips - Chain breaker - 8/10mm wrench - 4 spoke wrenches - Disc brake wedge - Rotor truing tool

- Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Hex 2/2.5/3/4/5/6/8mm - T10/T25/T30 - Phillips - Flathead - New chain-breaker tool (included hex 8/10mm wrench, 4 spoke wrenches) - Multi-function flat tool (bottle opener, disc brake wedge, rotor truing tool) - 173g

Combining style, technology, and ultimate value, the Rap II series bike multi tools provide unmatched performance at their price points. Engineered and manufactured in-house, these multi tools feature a number of innovative features including an integrated, machined aluminum CO2 dispenser. The ergonomic side-plates are machined from lightweight aluminum, anodized black, and offer a custom magnetic holder for an emergency quick-link. The steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. There are seven available configurations featuring up-to-date options for all modern bicycles, including gravel bikes, mountain bikes, e-bikes, and road bikes. Compact and versatile, these mini tools are built to last and designed to efficiently get riders back on the road or trail. - Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Weight: 187g Tool bits: - Quick link holder - Hex 2/2.5/3/4/5/6/8mm - Torx T10/T25/T30 - Phillips - Flathead - Chain breaker - 8/10mm wrench - 4 spoke wrenches - Disc brake wedge - Rotor truing tool - CO2 inflator

Pre-calibrated, torsion-beam-style torque wrench. Machined aluminum construction with removable handle and integrated magnet to hold tool bits in place. 2Nm – 10Nm torque capacity. No preset necessary-simply twist until marker lines up with desired torque setting. Includes soft shell carrying case with storage cutouts. - Weight: 190g Tool Bits - Hex 2, 2.5, 3, 4, 5, 6mm - Star Shaped T10, T25, T30 - Flat Head - Phillips-Head

The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.

Perfect for pro and novice mechanics, Jagwire's Pro Cable Crimper and Cutter is made from high-quality steel to provide clean cable cuts without fraying every time. They're also great for crimping on cable ends. The vinyl-coated handles make these cutters great to use and the yellow makes them easy to spot on your workbench or in your toolbox, too!

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

Regular chain and component cleaning is a chore no more with Finish Line's Starter Kit 1-2-3. It starts with Finish Line's popular Multi Degreaser for cleaning, and their versatile Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too. Then, after cleaning, get your bike running smoothly and silently again with the included Finish Line Dry Teflon lube and you're good to go!

- For clean cutting of bicycle cables and housings - Spring loaded for ease of use - Built-in pick for opening housing liner

- For removal of cassette-type rear wheel gears - Must be used with Chain Whip tool when removing lockring - Compatible with Shimano/SRAM cassettes - Comfortable rubber coated handle improves grip

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9 and 10-speed chains

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9, 10 and 11-speed chains - Comfortable rubber coated handle improves grip

- For removal of cassette-type rear wheel gears - Must be used with compatible cassette lockring tool - Comfortable rubber coated handle improves grip - Fits up to 9sp cassette

- 7-pc wrench set includes 1.5, 2, 2.5, 3, 4, 5, 6mm hex wrenches - Long handles for improved grip and reach - Ball-ends allow up to a 25-degree entry angle so you can easily reach around obstructions - Color coated for quick reference

- For removal of master or quick chain links - Compatible with 7, 8, 9 and 10-speed chains - Spring loaded for ease of use - Comfortable rubber coated handles improves grip

- For installation or removal of pedals - Compatible with most pedal axles - Comfortable rubber coated handle improves grip - 15mm wrench size